Mobile
Log In Sign Up
Home > chinese-english > "liquid phase sintering" in English

English translation for "liquid phase sintering"

液相烧结

Related Translations:
sinter cone:  泉华丘泉华锥
sintering compact:  烧结坯块
sintering tendency:  烧结性
sintered metallic:  二级油过滤器
sintered nickel:  烧结镍
sintering section:  烧结工段
pack sintering:  兰州相烧结
sintering phenomenon:  烧结现象
sintered fuel:  忍烧结材料人
Example Sentences:
1.Liquid phase sintering of boron carbide
碳化硼陶瓷的液相烧结试验研究
2.Liquid phase sintering nano - zirconia toughened dental all - ceramics at low temperature
低温液相烧结纳米氧化锆增韧口腔全瓷材料的研究
3.The study showed that the densified process should be divide into two stages - solid phase sinter stage and liquid phase sinter stage
研究表明,液相烧结mo - cu合金的致密化过程分为固相烧结阶段和液相烧结阶段。
4.The density of the mo - cu sinter was measured . the result of the measure showed that the liquid phase sintered mo - cu alloy gained 95 - 97 % relative density . the densified process was well carried out
本文测试了mo - cu烧结体的密度,测试结果表明,液相烧结mo - cu合金的相对密度在95 97之间,基本上实现了致密化。
5.In this paper , the mechanical alloy technology ( ma ) was adopted . through the designing and optimizing of the ma technology and liquid phase sinter technology , the new electrician alloy - mo - cu was made
本文采用粉末冶金的非平衡制备高新技术?机械合金化法,通过机械合金化工艺、粉末生坯压制工艺和液相烧结工艺的设计与优化,制备出了mo - cu高比重合金。
6.The process of the high energy ball milling , the process of the flan press and the process of the liquid phase sinter was studied . and the influence of those processes to the property of the mo - cu alloy was concluded
本文从工艺上主要研究了mo - cu复合粉末的高能球磨工艺、 mo - cu粉末生坯的压制工艺、液相烧结工艺以及不同的工艺条件对材料性能的影响。
7.The resulted microstructure is ld ' + a ' + mc + m6c , density not less than 8 . 0g / cm3 and hardness not less than hrc50 . the effects of alloying elements , sintering process , microstructure and liquid phase sintering on properties of pm inserts are discussed too
制备出了符合性能要求的粉末冶金摇臂镶块,其密度8 . 0g / cm3 ,硬度50hrc ,其耐磨性能已达到日本进口件的水平。
8.The result of the xrd , sem and tem analysis show that the densification process was controlled by the mechanical of liquid phase sintering with the addition of mgo and ce02 as the sintering aid . the mgo - ceo2 would react with the sio2 which was on the surface of the silicon nitride particles to from silicate liquid phase to accelerate the densification
通过xrd 、 sem 、 tem等测试结果表明,由于同时添加了mgo和ceo _ 2作为助烧剂,其致密化过程为液相烧结,由烧结助剂和si _ 3n _ 4表面的sio _ 2反应形成低熔点的硅酸盐相,促进烧结致密化,冷却后,在晶界形成玻璃体。
9.The process of the liquid phase sinter was studied , the study showed that the mo - cu sinter could gain 95 % - 97 % relative density when the relative density of the flan was 70 % - 80 % , the sinter temperature was 1100 - 1200 , the sinter time was 80min - 100min and the sinter atmosphere was hydrogen
本文通过对mo - cu粉末生坯的烧结工艺研究得出,粉末生坯相对密度为70 80 ,烧结温度为1100 1200 、等温时间为80 120min 、氢气保护气氛下,可制备出具有高致密度的mo - cu粉末烧结体。
Similar Words:
"liquid phase polymerization" English translation, "liquid phase protein sequencing" English translation, "liquid phase reaction" English translation, "liquid phase separation" English translation, "liquid phase separaton" English translation, "liquid phase sintering mechanism" English translation, "liquid phase suspension process" English translation, "liquid phase thermal cracking" English translation, "liquid phase volume" English translation, "liquid phosphor" English translation